Steady Sail-On-Side Cf Data:


Each file in table1 gives steady, sail-on-side, skin-friction data at a specific angle of attack. In each file, there are 14 pairs of columns. Each pair represents the data acquired at a specific x/L location. These are the locations of the sensors that belong to the sensor set B. Note that the barebody data were acquired by using only sensor set B, whereas the sail-on-side data were obtained both with sensor set B and sensor set A. First column of each pair is the circumferential location phi , and the second column is the skin friction value. The x/L locations are (in order) : 0.110, 0.131, 0.170, 0.266, 0.306, 0.345, 0.434, 0.501, 0.570, 0.638, 0.706, 0.774, 0.819,  and 0.863. In the data files, Cf is equal to -100.0 at the phi locations where the sensor is under the sail. It has no physical meaning, and is given as the output of the data reduction program.
 


Table 1: Steady, sail-on-side, skin-friction data at a specific angle of attack acquired from sensor set B.

File
     figure number in chapter 5 of ref. [1]
steady, sail-on-side, set B, a = 0.9°
figure 5.5
steady, sail-on-side, set B, a = 3.1°
figure 5.6
steady, sail-on-side, set B, a = 5.1°
figure 5.7
steady, sail-on-side, set B, a = 7.2°
figure 5.8
steady, sail-on-side, set B, a = 9.3°
figure 5.9
steady, sail-on-side, set B, a = 11.3°
figure 5.10
steady, sail-on-side, set B, a = 13.2°
figure 5.11
steady, sail-on-side, set B, a = 15.3°
figure 5.12
steady, sail-on-side, set B, a = 17.4°
figure 5.13
steady, sail-on-side, set B, a = 19.4°
figure 5.14
steady, sail-on-side, set B a = 21.4°
figure 5.15
steady, sail-on-side, set B, a = 23.4°
figure 5.16
steady, sail-on-side, set B, a = 25.5°
figure 5.17
steady, sail-on-side, set B, a = 27.6°
figure 5.18



Each file in table 2 gives steady, sail-on-side, skin-friction data at a specific x/L location (for the sensors of set B). In each file, there are 14 pairs of columns. Each pair represents the data at a specific steady angle of attack. First column of each pair is the circumferential location phi , and the second column is the skin friction value. The steady angles of attack are (in order) : 0.9, 3.1, 5.1, 7.2, 9.3, 11.3, 13.2, 15.3, 17.4, 19.4, 21.4, 23.4, 25.5, and 27.6 degrees. In the data files, Cf is equal to -100.0 at the phi locations where the sensor is under the sail. It has no physical meaning, and is given as the output of the data reduction program.
 


Table 2: Steady, sail-on-side, skin-friction data at a specific x/L location (sensor set B).

File
     figure number in chapter 5 of ref. [1]
steady, sail-on-side, set B, x/L=0.110
figure 5.19
steady, sail-on-side, set B, x/L=0.131
figure 5.20
steady, sail-on-side, set B, x/L=0.170
figure 5.21
steady, sail-on-side, set B, x/L=0.266
figure 5.22
steady, sail-on-side, set B, x/L=0.306
figure 5.23
steady, sail-on-side, set B, x/L=0.345
figure 5.24
steady, sail-on-side, set B, x/L=0.434
figure 5.25
steady, sail-on-side, set B, x/L=0.501
figure 5.26
steady, sail-on-side, set B, x/L=0.570
figure 5.27
steady, sail-on-side, set B, x/L=0.638
figure 5.28
steady, sail-on-side, set B, x/L=0.706
figure 5.29
steady, sail-on-side, set B, x/L=0.774
figure 5.30
steady, sail-on-side, set B, x/L=0.819
figure 5.31
steady, sail-on-side, set B, x/L=0.863
figure 5.31



Each file in table 3 gives steady, sail-on-side, skin-friction data at a specific angle of attack. In each file, there are 15 pairs of columns. Each pair represents the data acquired at a specific x/L location. These are the locations of the sensors that belong to the sensor set A. First column of each pair is the circumferential location phi , and the second column is the skin friction value. The x/L locations are (in order) : 0.151, 0.180, 0.189, 0.199, 0.218, 0.256, 0.266, 0.276, 0.285, 0.295, 0.316, 0.325, 0.336, 0.356, and 0.366. In the data files, Cf is equal to -100.0 at the phi locations where the sensor is under the sail or it indicates a bad voltage value. It  has no physical meaning, and is given as the output of the data reduction program.

Table 3: Steady, sail-on-side, skin-friction data at a specific angle of attack acquired from sensor set A.

File
steady, sail-on-side, set A, a = 0.9°
steady, sail-on-side, set A, a = 3.1°
steady, sail-on-side, set A, a = 5.1°
steady, sail-on-side, set A, a = 7.2°
steady, sail-on-side, set A, a = 9.3°
steady, sail-on-side, set A, a = 11.3°
steady, sail-on-side, set A, a = 13.2°
steady, sail-on-side, set A, a = 15.3°
steady, sail-on-side, set A, a = 17.4°
steady, sail-on-side, set A, a = 19.4°
steady, sail-on-side, set A a = 21.4°
steady, sail-on-side, set A, a = 23.4°
steady, sail-on-side, set A, a = 25.5°
steady, sail-on-side, set A, a = 27.6°